Reminder: a satellite antenna must be powered by direct current: remote power supply
To access to the Remote power supply page, press
Check for tension and current consumed by your dish's LNB :
To check if the aimed satellite is the right one : press the NIT key
The appliance searches the MPEG NIT table on one of the 4 transponders and displays the name of the sat-
ellite:
Attention:
The displayed name depends on the content of the MPEG NIT table.
Some distributors provide no (or poor) such table.
The displayed information may be wrong.
7849B – 7859B – 7817B
p.
20