SEFRAM 7849B User Manual page 5

7849B – 7859B – 7817B
Some advice!
Some technical help!
SEFRAM Instruments & Systèmes commits itself to help you on the phone about the use of your appliance.
Please call or Technical Support:
04 77 59 01 01
Or e-mail:
support@sefram.com
We thank you for your trust.
METROLOGY
The meteorological conditions of your measurement instrument are defined in the specifications of this notice. Climate and
environmental conditions restrict the specifications of your Field Strength Measurer (MDC). SEFRAM checks the characteris-
tics of each appliance one by one on an automatic bench during its manufacture. The adjustment and control are guaranteed
under conditions of the ISO9001 certification by facilities in connection with the COFRAC (or equivalent in the context of
ILAC reciprocity).
The specified characteristics are considered stable for a period of 12 months from the first use under normal conditions of use.
We recommend a check after 12 months and max. 24 months of use, then every 12 months after 24 months.
For any check of the characteristics, the following average climate conditions shall be maintained (23°C+3°C – 50(+20)%RH).
The MDC should have been working for 0,5 hour before check.
We recommend that you have this control made by our after-sales service (Service Après-Vente) for the best service and
preservation of the measuring quality of your instrument.
When a MDC returns to SEFRAM, maximum service is provided with internal updating according to the required adjustments
and software updates. In case of shift in the characteristics, your instrument shall be adjusted to recover its original characteris-
tics.
PACKAGING
The packaging of this product is fully recyclable. Its design allows the transport of your instrument under the best possible
conditions. Please note that the original packaging should be additionally wrapped in case of transport by air, road or postal.
SPARE PARTS
According to the consumption law of March 17, 2014, Article L111-3 and Decree 2014-1482 of 09/12/2014, SEFRAM in-
forms you of the availability of spare parts of products placed on the market as of March 1, 2015:
Spare parts are not available to the consumer. SEFRAM offers the supply of spare parts during repair by its service.
Consumable parts are provided according to the legislation applicable to them (case of batteries).
SEFRAM is committed to providing parts or alternatives for a period of at least 2 years beyond the warranty period.
p.
5