Quick Start-Up; Installing A Terrestrial Antenna; Use Of The Pointing Function - SEFRAM 7849B User Manual

4 Quick start-up

4.1

Installing a TERRESTRIAL antenna

You have two methods to install a terrestrial antenna :
4.1.1

Use of the POINTING function

The appliance gets an "Antenna pointing" mode in order to align quickly and easily your terrestrial antenna.
To access to the "Antenna pointing" mode from the HOME page, press
 Select the emitter to point to in the pre-informed list: (example ST ETIENNE) :
 The device successively scans 4 channels and gives an RF indication corresponding to the level of the
signal received on the antenna and QUALITY corresponding to the quality of the signal received on the
antenna.
Uncorrectly pointed antenna
 Slowly orientate the antenna until hearing the locking melody and getting the best quality
7849B – 7859B – 7817B

using the POINTING function

using the SPECTRUM function
No transmitter found, bad reception quality → red smiley
Average reception quality (< 50%) → orange smiley
Good reception quality (> 50%) → green smiley
Correctly pointed antenna
p.
15