Satellite Band; Power On - SEFRAM 7849B User Manual

14.2

Satellite band

14.2.1

Power ON

Setting the remote power supply to satellite:
OFF to turn off the
remote power supply
under satellite measure
ON to turn on the
remote power
supply under satel-
lite measure
AUTO to launch au-
tomatically the re-
mote power supply in
satellite measure
mode even after
shutting off
Configuration lines:
- LNB : LNB type and local
oscillators LO1 (low band)
and LO2 (high band)
- LO selection: band commutation
on the LNB (22kHz, ToneBurst or
DiSEqC)
- Selection polar : polarization
commutation on the LNB (13/18V
or DiSEqC)
- Switch: switch type and position
(No, ToneBurst, 22kHz, DiSEqC,
Pos A, B, C or D)
-Uncommitted: "Uncommitted" switch type
and position (No, DiSEqC, Pos 1 to 16)
-Positioner: presence of a positioner
(Yes / No)
-DCSS: Digital Channel Stacking (2
modes SATCR and SCD2 single
cable distribution)
See chapter Man-machine interface
7849B – 7859B – 7817B
for any change.
p.
66