Once the mode selected, the keys of the various parameters activate or deactivate each option.
A green check shows that the parameter is included in the research. If there is no green check, the param-
eter will not be taken into account for the research.
Attention: The more you select options, the longer is the research.
10.1
Terrestrial mode
This mode allows automatic research on the terrestrial frequency band.
The table allows the selection of:
Standards
Channel widths
The channel range of the research
(i.e. 21 to 60).
The goal is to make researches shorter
by defining at best the settings
(example: in France, DVB-T, 8MHz,
channels 21 to 60)
10.2
Satellite mode
This mode allows automatic research on the satellite frequency band.
The table allows the selection of:
LNB bands
LNB polarisations.
The goal is to make researches shorter again
10.3
Cable Mode
This mode allows automatic research on the cable frequency band.
The table allows the selection of:
Standards
Channel widths
The search range of channels
7849B – 7859B – 7817B
Active research parameter
Inactive research parameter
p.
46