Identification; Warranty - VARISCO JS Series Instructions For The Use And Maintenance

1 IDENTIFICATION

1.1 Manufacturer:
Varisco S.p.A., Terza Strada 9 - Z.I. Nord - 35129 PADOVA - Italy
1.2 Type of pump
Horizontal self-priming centrifugal pump with open impeller for handling liquids containing solids in suspension.
1.3 Model
The type of pump is shown on the pump name plate.
1.4 Year of manufacture
The year of manufacture is indicated on the pump name plate.
1.5 Instruction book identification
Edition: 2011/01
1.6 Nameplate information
TYPE
identifies the model of the
pump and/or unit (pump/gear
box/motor etc.)
Year of manufacture
m 3 /h
(max)
the maximum capacity
of the pump, measured
at the maximum speed
The values shown for the capacity (m
1000 kg/m 3
1.7 Field of application
The pumps are suitable for handling liquids of viscosity up to 50 cSt containing solids in suspension. They are used in industry, civil
engineering, shipbuilding, waste water treatment, construction and agriculture.
1.8 In case of breakdown contact Varisco S.p.A. : + 39 049 82 94 111
2

WARRANTY

All products manufactured by VARISCO SpA are guaranteed for 12 months from the date on which they are commissioned for the first time,
but not more than 18 months from the delivery date. Repairs under guarantee will not extend the warranty terms. The warranty covers material
and manufacturing defects that impair the way the product operates and make it unfit for the purpose for which it was designed, so long as
such defects are notified immediately, in any case no later than 2 days from the date on which they are discovered. Damage deriving from
the physical/chemical characteristics of the pumped fluid are not covered by the warranty, neither is damage to parts which, owing to their
nature or envisaged use, are liable to wear out or deteriorate (seals, diaphragms, vacuum and pressure valves, rubber and plastic parts), nor
damage which has been caused by failure to comply with the use and/or maintenance instructions, by bad or inadequate use or storage of
the product or by modifications or repairs made by persons who have not been explicitly authorized by VARISCO SpA. The warranty becomes
void if the serial number of the product cannot be identified. The warranty we furnish strictly depends on the purchaser having fulfilled all
the payments due until the date on which the claim is made and those that fall due during the warranty intervention. The decision to issue
a credit note, repair or replace the product is at the discretion of VARISCO SpA, whose decision about such matters is final. The goods
may only be returned if authorized in writing, and must be sent carriage free to VARISCO SpA - Padua. All the expenses for disassembling/
re-assembling the product from/in the installation site and all other operations therein are at the purchaser's charge. The repaired or replaced
goods will be re-consigned to the purchaser ex works of VARISCO SpA - Padua. Substituted goods become the property of VARISCO SpA. It
is hereby understood that this warranty absorbs and substitutes the warranties or liabilities established by law, and excludes all other liability
of VARISCO SpA (reimbursement of damages, loss of profit, withdrawal campaigns, the purchaser's manpower, building site standstills, sale
price reduction, etc.). All disputes are the exclusive competence of the court of Padua.
2.1 WARRANTY EXCLUSIONS
The warranty becomes void (besides the matters indicated in the supply contract):
- If there has been a manoeuvring error ascribable to the operator.
- If the damage has been caused by insufficient maintenance.
- If spurious spare parts have been used.
- Following failure to comply with the instructions in this manual.
Damages due to negligence, carelessness, bad and improper use of the pump are also excluded from warranty coverage. Removal of the
safety devices with which the pump is equipped will automatically void the warranty and relieve the Manufacturer from all deriving liability.
Revision: 01 Cod. 402
TYPE
MATR.
m /h (max)
3
m
(max)
the closed valve head of
the pump measured at
the maximum speed
3 /h), head (m), power (kW) and speed (RPM) refer to testing with water at 20° C and density
MATR.
the serial
number of
the pump
ITEM
m (max) kW RPM (max)
kW
the maximum
power of the pump at
the maximum speed
the number which links the pump
to the contract documents (only if
requested)
the weight of the pump or of
the unit, excluding the weight of
liquid in the pump casing.
kg
RPM
input the maximum operating rotation
speed of the pump. The pump
must never be run faster than
this speed.
ITEM
kg
(max)
13