Advertisement
THANK YOU for your purchase of the RC towing machine ECOTOP MARACANA!
We made a main effort while drawing and building this plane so that it is the best model you ever built and fly.
We provide you a kit with the highest quality and the best possible performances.
We wish you a great success while assembling and flying your new ECOTOP MARACANA.
If you're ready to step up to a low wing aerobatic plane, the ECOTOP MARACANA is the perfect choice.
This optimally balanced airplane combines excellent stability with expert-level maneuverability. The large area and perfectly selected airfoil
of the main wing and precision design fuselage delivers calm control response while the large control areas produce dynamic stunt flight
capability. However, while producing the flight performance expected of a dedicated stunt flier design, the MARACANA traces its lines so
smoothly though the air it stands apart from other aerobatic airplanes.
The quickbuild kit comes in ARF specifications complete with vinyl film covering and is very straightforward to build.
IMPORTANT: Please take a few moments to read this instruction manual before beginning assembly. Do an inventory of the parts using the
parts list, to control that there is no lack or imperfection.
Thank you to contact TOPMODEL immediately, if you note a missing part or a damaged part.
WARRANTY: It is important to notify to TOPMODEL all damage or problems with this model within 7 days following the reception of the kit to
be able to benefit the warranty. In the event of return of the model, the customer is responsible for transport and return shipping cost is at his
expenses. In the event of defect, the part will be exchanged or replaced once this one will be delivered to TOPMODEL for expertise (transport
on your cost). In the event of problem, do not hesitate to contact TOPMODEL.
TOPMODEL cannot control the dexterity of the modeler and cannot influence the builder during the assembly or the use of this radiocontrolled
model, thus TOPMODEL will in no way accept or assume responsability or liability for damages resulting from the use of this user assembled
product.
The purchaser/user accepts all the responsibilities in the event of structural or mechanical problems.
TO ASSEMBLE THIS KIT
To assemble this kit, you'll need the items listed below:
■ ADHESIVE:
Cyanoacrylate thin and thick, epoxy 30' and 5' adhesives.
■ TOOLS:
Knife (X-acto), Phillips screw driver (small and medium), needle tip pliers, pliers, scissors, scotch tape, masking tape, double sticking tape,
drill (bits all size set), sanding paper, ruler, ball point pen, clips, alcohol, soldering iron, piece of cloth or rags, etc.
Electric version
■
Brushless motor XPower XC3526/10
■
XPower XREG 60 controller
■
Hot-Lips 4000mAh 3S1P LiPo battery pack
■
APC E 11x8,5" propeller
REMINDER
We take great care to delivering the best possible quality.
We kindly remind you that these models are not ready to fly and that the remaining work is an important part to get the model flying. For this, please,
check all glue joints and assemblies.
Safety first!
We thank you for your attention during the assembly of our kits, and wish you good and numerous flights!
TOPMODEL SAS
3
Advertisement
