Inputs And Outputs - SIIG AV-GM08K3-S1K Manual

Inputs and Outputs

The AV-GM08K3-S1K has 16 inputs and accepts both graphics and video signals, which come
from computers (DVI or VGA), composite, and component video sources respectively. You can
pick up four of the ten inputs and then display four of them simultaneously on the same screen.
Figure 2 shows the rear panel connectors of a AV-GM08K3-S1K and Table 1 illustrates how you
can connect video devices and display to the AV-GM08K3-S1K.
Default: Turn on the AV-GM08K3-S1K then switch the circled DIP switche
*
simultaneously up and down to factory default mode.
These IO ports support various resolution from 640x480 up to 1920x1200, for more
*
detail of the supported modes, please refer to the Appendix – Supported Resolution.
Input Connector
DVI-x
YPbPr-x/VGA-x
CVBS-x
S-Video-x
[x = 1~4]
Output Connector
DVI-I OUT
Figure 2: Rear Panel
Table 1: Input/Output Connectors
[1] DVI
[2] VGA — with a DVI-to-VGA adapter (DVA01)
[3] Component (YPbPr) — with a DVI-to-VGA adapter (DVA01) and a
VGA-to-component breakout cable (VYPBA01)
[4] CVBS
[5] S-Video
[1] DVI display
[2] VGA display — with a DVI-to-VGA adapter (DVA01)
[3] 1x DVI display + 1x VGA display — with a DVI to DVI&VGA breakout cable
(DDVY01)
Video Source
Display
7