Instruction Of Software Connection - SIIG AV-GM08K3-S1K Manual

1. The AV-GM08K3-S1PF provides a software control program, Quartet, which runs under Microsoft
Windows 98, 2000, XP, Vista through the interface of RS-232 serial control.
2. Before you click on the icon of the software, make sure you have secured the connection between
your computer COM port and the AV-GM08K3-S1PF and switched on the AV-GM08K3-S1PF with green
LED light.

Instruction of Software Connection

1. Power up the AV-GM08K3-S1PF and you can see VFD on the front panel blink. Make sure the serial
port mode is right for your setting. RS-232 mode:
2. The first step after running the software is to automatically link (By last COM port setting) if the device
responses correctly through RS-232, it will start application normally, otherwise the dialog will show
up. You can click the "scan" button to get detail information. The information will help you choose the
correct COM port and Device ID. After set the correct COM port and ID, you can select "Linkage" and
click "Execute" button. When the AV-GM08K3-S1PF is correctly connected, you can close the Linkage
dialog. If the serial connection is well established, you can see work main control console as below.
.
12
, RS-485 mode: or .