About The Base Unit - Barco ClickShare CSE-200+ Installation Manual

CSE-200+ Specifications
Temperature range
Humidity
Anti-theft system
Certifications
Warranty
Button
Weight
Frequency band
Wireless transmission
protocol
Authentication protocol
Dimensions (HxWxD)
Power consumption

2.3 About the Base Unit

Base Unit
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting
room display and the sound of the meeting room's audio system.
The Base Unit can be installed in two different ways.
Base Unit functionality
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room
display and the sound of the meeting room's audio system.
The Base Unit can be inside a cabinet in the meeting room, or put on the meeting room table or mounted on a
wall. Check the Installation Guide for instructions on how to install the Base Unit.
1
Image 2-2
28 R5900087 /04 ClickShare CSE-200+
Operating: 0°C to +40°C (+32°F to +104°F)
Max: 35°C (95°F) at 3000m
Storage: -20°C to +60°C (-4°F to +140°F)
Storage: 0 to 90% relative humidity, non-condensing
Operation: 0 to 85% relative humidity, non-condensing
Kensington lock
FCC/CE
3 years standard
75 g/0.165 lb
2.4 GHZ and 5 GHz
IEEE 802.11 a/b/g/n
WPA2-PSK in stand alone mode
WPA2-PSK or IEEE 802.1X in network integration mode
16.3 mm x 59.3 mm x 162.52 mm / 0.64" x 2.335" x 6.398"
Powered over USB
5V DC
350mA Typical
500mA Maximum
2
3