Barco ClickShare CSE-200+ Installation Manual page 106

Troubleshooting
Problem
Web Interface shows error in the
processes "WiFi Access Point
Daemon" and/or "DHCP Server"
ClickShare Base Unit does not
start up correctly
No LAN connection with the Base
Unit
No WiFi connection with Base Unit SSID not correct
Locate the problem you are experiencing in the table below and apply the solution.
Barco knowledge base and YouTube videos
Go to the product page on Barco's website and select in the right column Support. You will get access to
Barco's Knowledge base and Latest tutorial videos. For more YouTube videos, consult
https://www.youtube.com/user/barcoTV
106 R5900087 /04 ClickShare CSE-200+
Cause
Metal cabinets, walls, construction
elements, ... can cause reflections
deteriorating the wireless signal.
Obstructions between Buttons and
Base Unit cause lowering of the
wireless strength and quality.
Configuration file is corrupted
Configuration file is corrupted
Wrong IP address
and select ClickShare.
Solution
Move the Base Unit to another
place in the room.
Avoid placing it inside cabinets,
false ceiling, below the table,
behind a wall, in another room, ....
Re-orient he Base Unit antennas
Check out the ClickShare White
paper on WiFi See
www.barco.com/clickshare.
Browse to the Configuration tab on
the Web Interface and press "Load
Default Settings".
Browse to the Configuration tab of
the Web Interface and press "Load
Default Settings".
IP address is not within your LAN
range.
DHCP is not enabled.
Enter the correct SSID