Barco ClickShare CSE-200+ Installation Manual page 55

Image 6-8: Personalisation, On-Screen ID
Meeting room name, location and welcome message
1. Log in to the Configurator.
2. Click Personalisation → On-screen ID.
3. Click in the input field next to Meeting room name and enter a name for the meeting room.
This text is shown on the user's device when the Button is ready to share ("Ready to share on..."), on the
central screen connected to the Base Unit and in the list of AirPlay receivers on the user's iOS device.
4. Click in the input field next to Location name and enter the location.
5. Click in the input field next to Welcome message and enter the desired message.
Show on-screen information
1. Log in to the Configurator.
2. Click Personalisation → On-screen ID.
3. Check the check box in front of Show meeting room info.
Checked: meeting room name, location and welcome message are displayed on-screen when nothing is
shared.
Not checked: nothing is shown on-screen.
4. Check the check box in front of Show network info.
Checked: LAN information such as wired IP address, hostname are displayed. Also the Wi-Fi IP address and
SSID are displayed.
Not checked: no LAN nor Wi-Fi information is displayed.
5. Check the check box in front of Show source names.
Checked: the source name of the shared content is displayed on the screen.
Not checked: no source info displayed on the screen.
CSE-200+ Configurator
R5900087 /04 ClickShare CSE-200+ 55