Barco ClickShare CSE-200+ Installation Manual page 100

CSE-200+ Configurator
Image 6-60: Troubleshoot, factory defaults
3. Click Reset to factory defaults.
The following message is displayed: "This action will remove all settings of the Base Unit and replace them
with the default settings. Are you sure you want to continue?"
4. If you want to continue, click Yes, remove all settings otherwise click No, I changed my mind.
When yes is clicked, the system starts a reboot.
Alternative way: The Base Unit can be reset to factory defaults by plugging in the power cable while
pressing the reset button.
100 R5900087 /04 ClickShare CSE-200+