Advertisement
Step 7: Attach the NPT Tube
To attach the NPT Tube (b), simply thread the Coupler (a) onto an existing NPT Tube. Make sure the lower NPT Tube is oriented so the
quick connect is facing toward the front as shown in the Side View of Diagram 7. Insert and tighten the Set Screws into each hole in the
coupler with the Allen Key (l) as shown in the Detailed View of Diagram 7.
Detailed View
Step 8: Attach the Axis Assembly
To attach the two parts of the quick connect, slide the portion of the quick connect that is attached to the Axis Assembly (c) onto the
portion that is connected to the NPT tube. The two V shapes should form together so the Axis Assembly is secured to the tube. Proceed
to add the Security Bolt (i) on the top of the quick connect as seen in the Detailed View of Diagram 8.
existing
NPT tube
a
j
b
Diagram 8
Diagram 7
Side View
Front
Detailed View
i
Advertisement
