Problem Solving; Technical Data - Opticon CS1504 Installation And Handling Instructions

problem
scanner doesn't work
scanner can't scan or
delete barcode
PC doesn't recognize
scanner
LED flashes red
LED flashes red, green
and orange
speification
supported barcode formats
memory capacity
compatible battery types
battery capacity
working temperature
max. humidity
weight
storage temperature
Version REV-00

problem solving

possible cause suggested solution
batteries is inserted insert batteries again.
the wrong way pay attention if plus and minus is correct
(instruction placed in lid)
batteries are dead replace batteries
scanner is broken send in scanner to your supplier
barcode is defective test scanner on other barcode
distance or ankle place beam vertically on barcode and modify the
doesn't fit distance
scanner is connected if the scanner is connected to PC, no codes can be
to PC scanned. Unplug scanner to gather data.
memory is full if more than 150 articles are scanned, data has to be
transferred to the PC or deleted
cable unplugged check if cable and adaptor is connected properly to
PC
PopScan-driver not install the driver again
properly installed
batteries are dead replace batteries
scanner is broken send in scanner to your supplier

technical data

information
UPC/EAN, Code 3 von 9, Code 128, D 2 von 5,
Coupon-Code
150 barcodes (30 characters per code)
Energizer EPX 76*
Energizer 357*
Maxell SR 44 W
Rayovac 357
* recommended by Symbol
approx. 5000 scans with fresh batteries
5°C to 40°C
95%
80 g (with batteries)
-20°C to 60°C
8