Advantech MIO-5393 User Manual page 47

9th/8th gen. intel xeon/ core hseries processor, 3.5" mi/ocompact sbc, ddr4, dp, hdmi, 48-bit lvds, 2 gbe, m.2 e key, m.2 b key, mioe

Table of Contents

3.1.2.11

USB Configuration

Legacy USB Support

Enables Legacy USB support. AUTO option disables legacy support if no USB

devices are connected. DISABLE option will keep USB devices available only for EFI

applications.

XHCI Hand-off

This is a workaround for OSes without XHCI hand-off support. The XHCI ownership

change should be claimed by XHCI driver.

USB Mass Storage Driver Support

Enable/Disable USB Mass Storage Driver Support.

USB Transfer Time-Out

Time-out value for control, Bulk, and interrupt transfers.

Device Reset Time-Out

USB mass storage device start unit command time-out.

Device Power-Up Delay

Maximum time the device will take before it properly reports itself to the Host Control-

ler. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the delay is

taken from Hub descriptor.

MIO-5393 User Manual

Table of Contents