Cisco ONS 15454 Install page 27

Chapter 1 Install the Shelf and Backplane Cable
Figure 1-10 Mounting Holes on All Other EIA Types
B-side
mounting
locations
Use a 5/16-inch nutdriver to install the extended standoffs in the mounting holes.
Step 4
Locate the TOP designation on one of the mounting bars (700-19701-XX) and align the appropriate
Step 5
holes for your EIA with the extended standoffs
78-18537-01
(Figure 1-11).
Cisco ONS 15454 Procedure Guide, Release 8.5.1
NTP- A11 Install the Rear Cover
A-side
mounting
locations
1-27