Safety; Introduction; Capabilities; Operator Training - Eclipse ExtensoJet EJ025 Installation Manual

Safety

i
NtroDuCtioN
s
afety
C
apabilities
o t
perator raiNiNg
r p
eplaCemeNt arts
Eclipse ExtensoJet v2 Installation Guide No. 230, 9/17/2008
In this section you will find important notices about safe operation
of a burner system.
Danger:
The burners covered in this manual are designed to
mix fuel with air and burn the resulting mixture. All
fuel burning devices are capable of producing fires
and explosions when improperly applied, installed,
adjusted, controlled or maintained. Do not bypass any
safety feature. You can cause fires and explosions.
Never try to light the burner if the burner shows signs
of damage or malfunctioning.
Warning:
The burner might have HOT surfaces. Always wear
protective clothing when approaching the burner.
Note:
This manual gives information for the use of these burners
for their specific design purpose. Do not deviate from any
instructions or application limits in this manual without
written advice from Eclipse.
Read this entire manual before you attempt to start the
system. If you do not understand any part of the
information in this manual, then contact Eclipse before you
continue.
Adjustment, maintenance and troubleshooting of the mechanical
and the electrical parts of this system should be done by
qualified personnel with good mechanical aptitude and experience
with combustion equipment.
The best safety precaution is an alert and competent operator.
Thoroughly instruct new operators so they demonstrate an
adequate understanding of the equipment and its operation.
Regular retraining must be scheduled to maintain a high degree of
proficiency.
Order replacement parts from Eclipse only. Any customer-supplied
valves or switches should carry UL, FM, CSA, CGA and/or CE
approval where applicable.
2
7