Table of Contents
Advertisement
Safety
Important notices for safe operation of the burner system
will be found in this section. To avoid personal injury,
damage to property or the facility, the following warnings
must be observed. Read this entire manual before
attempting to start the system. If any part of the
information in this manual is not understood, contact
Eclipse before continuing.
Safety Warnings
The burners covered by this guide are designed to
mix gas with air and burn the resulting mixture. All
gas burning devices are capable of producing fires
and explosions if improperly applied, installed,
adjusted, controlled or maintained.
Do not bypass any safety feature; fire or explosion
could result.
Never try to light a burner if it shows signs of
damage or malfunction.
The burner and duct sections are likely to have
HOT surfaces. Always wear protective clothing
when approaching the burner.
NOTICE
This manual provides information in the use of the
burner for its specific design purpose. Do not
deviate from any instructions or application limits
described herein without written advice from
Eclipse.
Eclipse AirHeat Burner, V2, Design Guide 135, 6/16/2010
DANGER
WARNING
Capabilities
Only qualified personnel, with good mechanical aptitude
and experience with combustion equipment, should
adjust, maintain or troubleshoot any mechanical or
electrical part of this system.
Operator Training
The best safety precaution is an alert and trained
operator. Train new operators thoroughly and have them
demonstrate
an
adequate
equipment and its operation. A regular retraining schedule
should be administered to ensure operators maintain a
high degree of proficiency.
Replacement Parts
Order replacement parts from Eclipse only. Any customer
supplied valves or switches should carry UL, FM, CSA,
CGA and/or CE approvals where applicable.
2
understanding
of
the
5
Advertisement
Table of Contents
