Table of Contents
Advertisement
Safety
i
NtroDuCtioN
s
afety
C
apabilities
o
t
perator
raiNiNg
r
p
eplaCemeNt
arts
Eclipse Winnox WX Series v1 Design Guide No. 111, 9/25/2008
This section is provided as a guide for the safe operation of
Winnox burner system. All involved personnel should read this
section carefully before operating this system.
Danger:
The Winnox burners, described herein, are designed
to mix fuel with air and burn the resulting mixture. All
fuel burning devices are capable of producing fires
and explosions if improperly applied, installed,
adjusted, controlled, or maintained. Do not bypass
any safety feature; fire or explosion could result.
Never try to light a burner if it shows signs of damage
or malfunction.
Warning:
The burner might have HOT surfaces. Always wear
protective clothing when approaching the burner.
Note:
This manual provides information in the use of these
burners for their specific design purpose. Do not
deviate from any instructions or application limits
described herein without written advice from Eclipse. Read
the entire manual before attempting to start this system. If
you do not understand any part of the information
contained in this manual, contact Eclipse before
continuing.
Only qualified personnel, with good mechanical aptitude and
experience with combustion equipment, should adjust, maintain, or
troubleshoot any mechanical or electrical part of this system.
The best safety precaution is an alert and trained operator. Train
new operators thoroughly and have them demonstrate an
adequate understanding of the equipment and its operation. A
regular retraining schedule should be administered to ensure
operators maintain a high degree of proficiency.
Order replacement parts from Eclipse only. All Eclipse approved,
customer supplied valves or switches should carry UL, FM, CSA,
CGA, and/or CE approval, where applicable.
2
7
Advertisement
Table of Contents
