Table of Contents
Advertisement
a
pprovals of
C
ompoNeNts
(C
)
ontinued
C
b
heCklist
efore
i
NstallatioN
Eclipse ExtensoJet v2 Installation Guide No. 230, 9/17/2008
Where To Get Standards:
The NFPA Standards are available from:
National Fire Protection Agency
Batterymarch Park
Quincy, MA 02269
The ANSI Standards are available from:
American National Standard Institute
1430 Broadway
New York, NY 10018
The UL Standards are available from:
333 Pfingsten Road
Northbrook, IL 60062
The FM Standards are available from:
1151 Boston-Providence Turnpike
P.O. Box 9102
Norwood, MA 02062
The CGA Standards are available from:
55 Scarsdale Road
Toronto, Ontario
Canada M3B 2R3
Information on the EN standards, and where to get the standards
is available from:
Comité Européen de Normalisation
Strassartstraat 36
B-1050 Brussels
Comité Européen de Normalisation Electronique
Strassartstraat 36
B-1050 Brussels
Intake
To admit fresh combustion air from outdoors, provide an opening
in the room of at least one square inch per 4,000 BTU/hr.
If there are corrosive fumes or materials in the air, then supply the
burner with clean air from an uncontaminated area.
Exhaust
Do not allow exhaust gases to accumulate in the work area.
Provide some positive means for exhausting them from the
furnace and the building.
Access
Make sure that you install the burner in such a way that you can
get easy access for inspection and maintenance.
Environment
Be sure the burner operating environment matches the original
operating specifications. Check the following items:
•
voltage, frequency, and stability of electrical power
•
fuel type and fuel supply pressure
•
adequate fresh, clean, combustion air
•
humidity, altitude, and temperature of the supply air
•
presence of damaging corrosive gases in the air
9
Advertisement
Table of Contents
Troubleshooting
