Cisco NCS 1004 Hardware Installation Manual page 33

Install Cisco NCS 1004
Figure 30: Two Post Slider Integration - ETSI Rack
1 Adapter
2 Slider fixing screws (48-101524-01)
Install Four Post Slider into an ETSI rack
This procedure has details about installing a four post slider in to an ETSI rack.
Step 1
Identify the four post slider and adjust the length of the slider.
Slide the inner slider arm and adjust the length to mate with the rack surface.
Install Four Post Slider into an ETSI rack
Hardware Installation Guide for Cisco NCS 1004
31