Cisco NCS 1004 Hardware Installation Manual page 28

Install Four Post Slider into an EIA/ ANSI Rack
Figure 25: Two Post Slider Integration - 23" Rack
1 Adapter
2 Slider fixing screws (48-101524-01)
Install Four Post Slider into an EIA/ ANSI Rack
This procedure has details about installing the four post slider into an EIA/ ANSI rack.
Step 1
Identify the four post slider and adjust the length of the slider.
Slide the inner slider arm and adjust the length to mate with the rack surface.
Hardware Installation Guide for Cisco NCS 1004
26
Install Cisco NCS 1004