Caution Notices For The System - IBM SAN Volume Controller 2145-SV1 Hardware Installation Manual

Caution notice definition
A special note that emphasizes a situation that is potentially hazardous to people because of some
existing condition, or to a potentially dangerous situation that might develop because of some unsafe
practice.
Note: In addition to these notices, labels might be attached to the product to warn of potential hazards.
Finding translated notices
Each safety notice contains an identification number. You can use this identification number to check the
safety notice in each language.
To find the translated text for a caution or danger notice:
1. In the product documentation, look for the identification number at the end of each caution notice or
each danger notice. In the following examples, the numbers (D002) and (C001) are the identification
numbers.
DANGER: A danger notice indicates the presence of a hazard that has the potential of causing
death or serious personal injury. (D002)
CAUTION: A caution notice indicates the presence of a hazard that has the potential of causing
moderate or minor personal injury. (C001)
2. After you download the IBM System Safety Notices document, open it.
3. Under the language, find the matching identification number. Review the topics about the safety
notices to ensure that you are in compliance.

Caution notices for the system

Ensure that you understand the caution notices for the system.
Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the
matching translated notice in IBM System Storage SAN Volume Controller Safety Notices.
CAUTION: The battery contains lithium. To avoid possible explosion, do not burn or charge the
battery.
Do not: Throw or immerse into water, heat to more than 100°C (212°F), repair or disassemble.
(C003)
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a
lifting device, or both to safely lift this part or unit. (C011)
CAUTION: To avoid personal injury, before lifting this unit, remove all appropriate subassemblies
per instructions to reduce the system weight. (C012)
CAUTION: The doors and covers to the product are to be closed at all times except for service by
trained service personnel. All covers must be replaced and doors closed at the conclusion of the
service operation. (C013)
xvi SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide