Caution Notices; Handling Static-Sensitive Devices - IBM Network Station E Series Setting Up

DANGER
To prevent a possible electrical shock, disconnect the power cord from
the electrical outlet before opening the IBM Network Station logic unit.
(RSFTD215)
DANGER
To reduce the risk of electrical shock use only AC power sources
approved by IBM. (RSFTD216)

Caution notices

A caution notice applies to a situation that is potentially hazardous to people
because of some existing condition.
CAUTION:
The battery is a lithium battery. To avoid possible explosion, do not burn or
charge the battery. Exchange only with the IBM-approved part. Discard the
battery as instructed by local regulations. (RSFTC227)

Handling static-sensitive devices

When you handle components, take these precautions to avoid static
electricity damage:
v Do not open static-protective packages until you are ready to install their
contents.
v Limit your movements to avoid static electricity build up around you.
v Handle components carefully, and never touch exposed circuitry.
v Prevent others from touching components.
v Place components on static-protective packages while performing hardware
installation and removal procedures.
v Do not place components on metal surfaces.
vi
IBM Network Station