Caution Notices; Laser Safety Information; Product Recycling And Disposal; Battery Return Program - IBM e Server i Series Setting Up

DANGER
To prevent a possible electrical shock from touching two surfaces with different electrical grounds,
use one hand, when possible, to connect or disconnect signal cables. (RSFTD004)

Caution Notices

A caution notice calls attention to a situation that is potentially hazardous to people because of some
existing condition.
CAUTION:
Telecommunications Statement: This unit contains over-voltage circuits between the ac power outlet
and the unit. These circuits meet the standard limits described in International Electrical Commission
(IEC) 664, installation category II. It is the customer's responsibility to ensure that the power outlet
meets the standards of IEC 664, installation category II. (RSFTC214)
Laser Compliance
All Lasers are certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for class
1 laser products. Outside the U.S., they are certified to be in compliance with the IEC 825 (first edition
1984) and as a class 1 laser product. Consult the label on each part for laser certification numbers and
approval information.

Laser Safety Information

CAUTION:
This product may contain a CD-ROM which is a class 1 laser product. (RSFTC240)
CAUTION:
All IBM laser modules are designed so that there is never any human access to laser radiation above a
class 1 level during normal operation, user maintenance, or prescribed service conditions. Data
processing environments can contain equipment transmitting on system links with laser modules that
operate at greater than class 1 power levels. For this reason, never look into the end of an optical fiber
cable or open receptacle. Only trained service personnel should perform the inspection or repair of
optical fiber cable assemblies and receptacles. (RSFTC243)

Product Recycling and Disposal

Components of the system, such as structural parts and circuit cards, can be recycled where recycling
facilities exist. IBM does not currently collect and recycle used IBM products from customers in the
United States other than those products that are involved in trade-in programs. Companies are available
to disassemble, reutilize, recycle, or dispose of electronic products. Contact an IBM account representative
for more information.
The system unit contains batteries and circuit boards with lead solder. Before you dispose of this unit,
these batteries and circuit boards must be removed and discarded according to local regulations or
recycled where facilities exist. This book contains specific information on each battery type where
applicable.

Battery Return Program

In the United States, IBM has established a collection process for reuse, recycling, or proper disposal of
used IBM batteries and battery packs. For information on proper disposal of the batteries in this unit,
please contact IBM at 1-800-426-4333. Please have the IBM part number that is listed on the battery
available when you make your call. For information on battery disposal outside the United States, contact
your local waste disposal facility.
vi
Setting up your 0588, 0595, 5088, 5094, 5095 or 5294 Expansion Unit V5R3