IBM SAN Volume Controller 2145-SV1 Hardware Installation Manual page 80

Table 14. Weight of an enclosure with 92 SAS drives (continued)
Approximate weigh per unit
FRU description
3.5-inch Near-
Line SAS hard
disk drive
As you install or replace FRUs, the overall weight of the expansion enclosure increases. For example,
Table 15 on page 48 shows the weight progression as different combinations of FRUs are installed.
Table 15. Enclosure weight as FRUs are installed
Enclosure assembly
FRUs installed
• Enclosure (01LJ607 or
01LJ112)
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
48 SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide
kg lb
0.876 1.931
FRUs not installed
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
• Drives
• Cover
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
• Drives
• Cover
• Drives
• Cover
Approximate extra weight
Maximum
supported
kg
92 80.592
Approximate weight
kg
42.5
44.3
58
lb
177.675
lb
93.7
97.7
127.9