Advertisement
TOYOTA
Picture 34A
41.
Remove the yellow labels from the DRL
harness.
42.
Hold the billet grille in front of the vehicle
and plug in the DRL's into harness.
43.
Take the billet grille and place it into the
chrome factory grille shell. Take six #10
screws and secure the top plate to the
vehicle by inserting the screws through the
six holes in the top plate and tighten (picture
35).
Picture 35
44.
Insert two #10 screws through the billet bars
at the bottom of the billet grille, through the
mounting plates with holes in them on the
back of the Billet and into the bottom
extension brackets and tighten (picture 36).
Southeast Toyota Distributors, LLC
TUNDRA
45.
Reinstall negative battery cable and torque
to 48 in-lbs
Check System for Operation
1.
DRL will work at full power when ignition
switch is ON. DRL will dim out to DOT
specifications when lights are ON.
2.
If DRL switch position is off, DRL will not
work at any time.
Page 12 of 16
Billet Grille w/LED DRL
Picture 36
Advertisement
