1.Safety Instruction Warning Please read carefully the instruction, which includes important information To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or about the installation, usage and maintenance. WARNING moisture. Please keep this User Guide for future consultation. If you sell the unit to another user, be Never touch bulb with bare fingers as it is very hot after using.
2. Technical Specification 3. Lamp • Voltage:AC 120V~60Hz or 230V/240V/250V~50/60Hz • Bulb:HID 150W In case of replacement of the lamp or maintenance, do not open the fixture within 15 minutes until the unit cools down after switching off. ELC 24V 250W •...
HID 150W Lamp Installation Or Replacement 4. How To Set The Unit • Always switch power off before installing or replacing the lamp. Never try to replace the 4.1 Control Panel lamp when it is hot. • Do not touch the bulb with bare hands. Cleaning the lamp with denatured alcohol and wipe with a lint free cloth when lamp is dirty.
4.2 Main Function Show Mode To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the function by ENTER button and the display will blink. Use Press the MENU button up to when the is showing on the display.
Page 6
ENTER button and the display will blink. Use DOWN and UP button to select the Color Mode (Led on) or (Led off) mode. Once the mode has been selected, press the ENTER button to setup or automatically return to the main functions without any change after 8 Press the MENU button up to when the is showing on the display.
Stand by Blackout the unit 5. How To Control The Unit Strobe X/Y moving show Color/Gobo X/Y moving setting 1.Gobo / Color mode selection selection 1.Pan position You can operate the unit in three ways: sync. ( Show 1 ~ Show 1.
6. Troubleshooting G. If The pan belt is broken Following are a few common problems that may occur during operation. Here are Turn off the main power. some suggestions for easy troubleshooting: Unscrew all the screws (A) and open the base-housing cover (B). Unplug all the connect wires (C) that from the arm to PC board and ignitor.
7. Maintenance and Cleaning Maintenance (for HID lamp only): EC Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the Ignitor capacitor Filter, Ballast, provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
Page 11
Technical Specifications Power AC 120V~60Hz AC 230/240/250V~50/60Hz Fuse 20mm Glass T6.3A 20mm Glass T5A HID 150W Lamp ELC 24V 250W Dimension 290 x 330 x 380 mm Weight 12 kg Innovation , Quality , Performance...