Check-Weighing - Adam Equipment Gladiator GGS 8 Manual


The display will now show a flashing unit which can be increased or
decreased using the ⭡ or ⭣ directional keys. Once you have set the desired
sample size, press the [Tare/↵] key.

From here you will return to the main piece counting display which will show
the number of pieces assigned to the weight on the scale. Adding or
removing weight will cause the number of pieces to change in relation to the
weight per piece.

Press the [Func/Set] key to change the mode.
6.7

CHECK-WEIGHING

Check-weighing is a procedure to cause lamps to come on (and if enabled, an alarm to
sound) when the weight on the scale meets or exceeds values stored in memory. The
memory holds the last values for a high and a low limit when the power is turned off. The
user can set either one limit or both as described below.
The limits can be set when the scale is in weighing or parts counting modes. After limits
have been set the Check-weighing function is enabled.
When a weight is placed on the scale the LED's above the display will show if the weight is
above or below the limits and the beeper will sound, if the beeper is enabled.

Press the [Func/Set] key to select the weighing mode.
Using the directional buttons ⭡ or ⭣, scroll through to the normal weighing

mode, "Weight" will be shown on the display. Press [Tare/↵] to confirm.

Once in normal weighing mode, hold the [CHK/PRINT] button for 2-3
seconds. "Hi" will appear on the display followed by a value on the display
with a flashing digit.
To set the high limit, use the directional keys ⭡ or ⭣ to scroll between

numbers 1-9 and the ⭢ directional key to move to the next digit. Press
[Tare/↵] to confirm.

Once confirmed, "Lo" will appear on the display followed by a value on the
display with a flashing digit.

To set the low limit, follow the same process as before using the directional
keys to scroll and [Tare/↵] to confirm.

Once confirmed you will return to the normal weighing screen. Placing an
object onto the scale will now turn the indicator display red, yellow or green
depending on whether the value is within, under or over the set weight limits.