Footswitch Battery - Chauvet DJ 4BAR QUAD User Manual

Footswitch Battery

The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product,
which can be replaced when necessary.
Battery Replacement
To replace the battery in the wireless footswitch:
1. Turn the power switch to the Off position.
2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver. (See
Overview)
3. Remove the old battery from the housing and unplug it from the leads.
4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond
to the correct electrodes on the battery.
5. Place the battery into the housing and cover with the battery cover.
6. Secure the battery cover with the 2 Phillips-head screws.
DO NOT overtighten the screws!
Page 12 of 18
Operation
Product
4BAR Quad User Manual Rev. 2