Mac-Based Vlan Configuration Example - H3C S5560S-EI Series Configuration Manual

# Verify that VLANs 100 and 200 are correctly configured on Device A.
[DeviceA-GigabitEthernet1/0/3] display vlan 100
VLAN ID: 100
VLAN type: Static
Route interface: Not configured
Description: VLAN 0100
Name: VLAN 0100
Tagged ports:
GigabitEthernet1/0/3
Untagged ports:
GigabitEthernet1/0/1
[DeviceA-GigabitEthernet1/0/3] display vlan 200
VLAN ID: 200
VLAN type: Static
Route interface: Not configured
Description: VLAN 0200
Name: VLAN 0200
Tagged ports:
GigabitEthernet1/0/3
Untagged ports:
GigabitEthernet1/0/2

MAC-based VLAN configuration example

Network requirements
As shown in
•
GigabitEthernet 1/0/1 of Device A and Device C are each connected to a meeting room. Laptop
1 and Laptop 2 are used for meetings and might be used in either of the two meeting rooms.
•
One department uses VLAN 100 and owns Laptop 1. The other department uses VLAN 200
and owns Laptop 2.
Configure MAC-based VLANs, so that Laptop 1 and Laptop 2 can access Server 1 and Server 2,
respectively, no matter which meeting room they are used in.
Figure 49:
139