H3C S5560S-EI Series Configuration Manual page 196

Figure 64 Basic VLAN mapping terms
One-to-one VLAN mapping
As shown in
replaces VLAN tags as follows:
•
Replaces the CVLAN with the SVLAN for the uplink traffic.
•
Replaces the SVLAN with the CVLAN for the downlink traffic.
Figure 65 One-to-one VLAN mapping implementation
One-to-two VLAN mapping
As shown in
the SVLAN tag for the uplink traffic.
For the downlink traffic to be correctly sent to the customer network, make sure the SVLAN tag is
removed on the customer-side port before transmission. Use one of the following methods to remove
the SVLAN tag from the downlink traffic:
•
Configure the customer-side port as a hybrid port and assign the port to the SVLAN as an
untagged member.
•
Configure the customer-side port as a trunk port and set the port PVID to the SVLAN.
Figure 65, one-to-one VLAN mapping is implemented on the customer-side port and
Figure 66, one-to-two VLAN mapping is implemented on the customer-side port to add
185
SP
Network-side port
Customer-side port
Uplink traffic
Downlink traffic