Installation - Rexing S1 Quick Start Manual

4. Installation

Step 1:
Install the Dash Cam
Place the 3M tape on the mount and properly orient the mount
square to the roof and hood line of the vehicle.
Firmly press the mount onto the windshield. Wait at least 20
minutes before mounting the camera.
Orient the mount as shown on the illustration above.
Step 2:
Insert the Memory Card
The Rexing S1 accepts [Class 10/UHS-1 or higher] Micro SD
memory cards up to 256GB. You will need to insert a memory
card before you can begin recording. Before inserting or
removing a memory card, first ensure you've powered
down the device. Gently push the memory card in until you
hear a click, and allow the spring release to push the card out.
8
Orient the
mount as shown