1 Notes on this manual
1.1 Validity
This manual describes the assembly, installation, commissioning and maintenance of the
following Growatt Inverter model:
MIN 2500 TL-XH/XE
MIN 3000 TL-XH/XE
MIN 3600 TL-XH/XE
MIN 4200 TL-XH/XE
MIN 4600 TL-XH/XE
MIN 5000 TL-XH/XE
MIN 6000 TL-XH/XE
This manual does not cover any details concerning equipment connected to the MIN TL-
XH( e.g. PV modules). Information concerning the connected equipment is available
from the manufacturer of the equipment.
Notice: The section containing "*" in this manual is only for TL-XH
inverters!
NOTICE
1.2 Target Group
This manual is for qualified personnel. Qualified personnel have received training and
have demonstrated skills and knowledge in the construction and operation of this
device. Qualified Personnel are trained to deal with the dangers and hazards involved in
installing electric devices.
1.3 Additional information
Find further information on special topics in the download area at www.ginverter.com
The manual and other documents must be stored in a convenient place and be available
at all times. We assume no liability for any damage caused by failure to observe these
instructions. For possible changes in this manual, GROWATT NEW ENERGY
TECHNOLOGY CO.,LTD accepts no responsibilities to inform the users.
1.4 Symbols in this document
1.4.1 Warings in this document
A warning describes a hazard to equipment or personnel. It calls attention to a procedure
or practice, which, if not correctly performed or adhered to, could result in damage to or
destruction of part or all of the Growatt equipment and/or other equipment connected
to the Growatt equipment or personal injury.
Symbol
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
DANGER
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
WARNING
1
description
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
CAUTION
NOTICE is used to address practices not related to personal injury.
NOTICE
Information that you must read and know to ensure optimal
operation of the system.
Information
1.4.2 Markings on this product
Symbol
Electrical voltage!
Risk of fire or explosion!
Risk of burns
Operation after 5 minutes
Point of connection for grounding protection
Direct Current (DC)
Alternating Current (AC)
The inverter has no transformer.
Read the manual
CE mark.
The inverter complies with the requirements of the applicable CE
guidelines.
Explanation
2
Need help?
Do you have a question about the MIN 2500TL-XH and is the answer not in the manual?
Questions and answers