NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the camera on the camera frame and secure the camera.
2. Connect the camera cable to the camera module.
3. Press the camera frame down into the slot on the display-assembly base until it snaps into place.
4. Route the camera cable and antenna cable through the routing guides on the display-assembly base.
Post-requisites
1. Replace the
back
cover.
2. Replace the stand.
Replacing the camera
computer. After working inside your computer, follow the instructions in
23
After
Replacing the camera
43