NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
1. Remove the screw that secures the wireless-card bracket and the wireless card to the system board.
2. Slide the wireless-card bracket off the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide the wireless card out of the wireless-card slot.
Removing the wireless card
computer. After working inside your computer, follow the instructions in
shield.
Removing the wireless card
16
After
33