Identifier
Status
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Connect the camera cable (WEBCAM) to the camera assembly.
2
Turn the camera assembly and align the screw holes on the camera assembly
with the screw holes on the middle frame.
3
Replace the two screws (M3x5) that secure camera assembly to the middle
frame.
Identifier
Status
Post-requisites
1
Replace the
inner
2
Replace the stand.
3
Replace the
back
GUID-690FF12D-2581-4326-8270-C4B813388FD3
Released
computer. After working inside your computer, follow
After working inside your
GUID-A450E113-5E46-4B80-819A-5308E3927740
Released
GUID-7E8ED145-5E0A-485E-9E46-CFB1A1437B4E
Released
frame.
cover.
computer. For more safety best
www.dell.com/
Before
37