NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the stand.
2. Remove the
back
cover.
Procedure
1. Remove the screws that secure the system-board shield to the display-assembly base.
2. Lift the system-board shield off the display-assembly base.
a. system-board shield
b. screws (4)
c. display-assembly base
Removing the system-board shield
computer. After working inside your computer, follow the instructions in
Removing the system-board shield
12
After
27