Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the stand.
2. Remove the
back
cover.
Procedure
1. Using a plastic scribe, push the securing clips on the control-buttons board slot.
NOTE:
Note the orientation of the control-buttons board so that you can replace it correctly.
2. Press the securing clips and lift the control-buttons board off the display-assembly base.
3. Open the latch and disconnect the control-buttons board cable from the control-buttons board.
1. control-buttons board
3. securing clips (3)
Removing the control-buttons board
computer. After working inside your computer, follow the instructions in
2. plastic scribe
4. control-buttons board cable
Removing the control-buttons board
18
After
37
Hide quick links:
Advertisement
Table of Contents
