NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
NOTE:
This chapter is applicable only for systems with a touch screen display. For systems with a non-touch screen
display, the microphones will be integrated on the camera assembly.
1. Remove the stand.
2. Remove the
back
cover.
Procedure
1. Note the routing of the camera cable and antenna cable and remove it from the routing guides using a plastic scribe.
2. Press the securing clip to release the camera frame from the tab on the display-assembly base and lift it off.
1. antenna cable
Removing the camera
computer. After working inside your computer, follow the instructions in
2. plastic scribe
22
After
Removing the camera
41