Makita DPB181 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. DC Motor
DISASSEMBLING
(1) Disassemble Motor section as drawn in Fig. 4.
Fig. 4
1. Push out the tap of Cap from the groove of Wheel A
with a slotted screwdriver and then remove Cap as
drawn below.
Cap
Wheel A (Motor side)
3. Remove Wheel A and Flat washer 6 from the machine.
Motor housing
Tab
Groove
Motor housing
M6x17 Hex socket head bolt
Flat washer 6
Wheel A
2. Remove M6x17 Hex socket head bolt with Impact
driver while holding the wheel by hand.
4. Unscrew three 4x18 Tapping screws
fastening Gear housing to Frame.
4x18 Tapping screw
(3 pcs.)
Gear housing
P 4/ 18
Frame