Makita DPB181 Technical Information page 12

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Upper Holder 42, Lower Holder 42
DISASSEMBLING
(1) Remove Upper holder 42 and Lower holder 42 as drawn in Fig. 15.
Fig. 15
Remove Lower holder 42 and
Upper holder 42 by unscrewing
4x18 Tapping screws (2 pcs. each).
(2) Disassemble Upper/Lower holder section as drawn in Fig. 16.
Fig. 16
1. Using Screwdriver No. 3, disassemble four Ball bearings 696ZZ
and two Flat washers 6 by unscrewing two M5 +Pan head screws.
Screwdriver No. 3
M5 +Pan head
screw (2 pcs.)
Upper/Lower holder section
2. Remove another Ball bearing 696ZZ together with Pin 6.
And pull off Pin 6 from the bearing.
4x18
Tapping screw
Lower holder 42
Flat
washer 6
Ball bearing 696ZZ
Pin 6
Upper holder 42
4x18
Tapping screw
Ball bearing
696ZZ (4 pcs.)
Flat washer 6
P 12/ 18