Slide Plate - Makita DPB181 Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY

[3] -5. Slide Plate

ASSEMBLING
Assemble Slide plate as drawn in Fig. 14.
Fig. 14
1. Set Lever 54 to the release position
to make the fitting space for the tab
portion of Slide plate.
tab portion of
Slide plate
Sleeve 5
(4 pcs.)
4. Push Slide plate toward the Tab side until it stops.
And turn M5x12 Hex socket set screw until it seats.
tab portion
M5x12 Hex socket
set screw
2. Set Protection plate to Flame.
Then, put 4 pcs. of Sleeve 5
to the illustrated position of
Frame. And then, set Slide
plate onto them.
Protection plate
5. Check that Slide plate can slide smoothly
Slide plate
M5x12 Hex socket
set screw
3. Secure Slide plate in place with
four 4x18 Tapping screws and
Flat washers 4.
without wobbling. If not, adjust the set screw
to turn it back less than 180° to slide the plate
smoothly.
P 11/ 18