SPECIFICATIONS Model DPB181 Max. cutting capacity Round workpiece 64 mm dia. Rectangular workpiece 64 mm x 64 mm Blade speed 3.2 m/s Blade size Length 835 mm Width 13 mm Thickness 0.5 mm Overall dimensions (L x W x H)
18. Do not use the power tool if the switch does Electrical safety not turn it on and off. Any power tool that cannot Power tool plugs must match the outlet. Never be controlled with the switch is dangerous and modify the plug in any way.
It will also void the Makita warranty for the Makita tool and rules for the subject product. MISUSE or charger.
Battery protection system (Lithium- FUNCTIONAL ion battery with star marking) DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjust- ing or checking function on the tool. Installing or removing battery cartridge ►...
To prevent the switch trigger from accidentally pulled, the trigger-lock button is provided. To start the tool, press the trigger-lock button from B side and pull the switch trigger. Release the switch trigger to stop. After use, always press in the trigger-lock button from A side. Lighting up the lamp CAUTION: •...
Insert the non-serrated side of the blade into the Hook (Optional accessory) upper holder and lower holder. Make sure the blade in both upper and lower holder touches to the bottom bearings. ► 1. Hook 2. Screws Hook is useful for hanging the tool. Hang tool on a pipe ►...
Select the proper cutting position for your workpiece by referring to the figure. When cutting metals, use Makita cutting wax as a cutting lubricant. To apply the cutting wax to the blade teeth, remove a cap of the cutting wax, start the tool and cut into the cutting wax as shown in the figure.
CAUTION: • These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.