Makita DPB181 Technical Information page 15

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -8. LED Light Circuit
DISASSEMBLING
(1) Separate Frame section from Motor housing section. And then, remove Handle R.
(See the upper illustrations in Fig. 5)
(2) Remove LED light circuit as drawn in Fig. 21.
Fig. 21
1. Pull off Rubber pin 4
with 1R311.
1R311
ASSEMBLING
(1) Set LED Light circuit to Handle L.
Note: Be careful that the circuit is not damaged when assembling.
(2) Insert Rubber pin 4 to the place as drawn in Fig. 21.
(3) Assemble Handle section and join them to Frame. (Refer to the upper illustrations in Fig. 5)
Rubber pin 4
2. Remove LED light circuit with 1R311.
LED light
P 15/ 18