Makita DPB181 Technical Information page 13

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Upper Holder 42, Lower Holder 42 (cont.)
ASSEMBLING
(1) Assemble Upper/Lower holder section as drawn in Fig. 17.
Fig. 17
1. Pass Pin 6 through Ball bearing 696ZZ and mount them to the holder.
Ball bearing 696ZZ
Pin 6
2. Pass M5 +Pan head screw through Ball bearing 696ZZ, Flat washer 6 and another Ball bearing 696ZZ,
and tighten the screw to the holder with Screwdriver No. 3.
Ball bearing
696ZZ
Ball bearing 696ZZ
(2) Assemble Lower holder 42 and Upper holder 42 to Frame as follows. (Refer to Fig. 15)
* Lower holder 42: Motor housing side
* Upper holder 42: Lever 54 side
Flat washer 6
Flat washer 6 Flat washer 6
P 13/ 18