Interface Operation; By Idrive-Buttons; By Keypad; Specifications - r.LiNK RL2-NBT Manual

3.

Interface operation

3.6.

By iDrive-buttons

Some of the iDrive-buttons can be used to execute interface functions.
Long press MENU-button (approx.. 3 seconds) to switch the video source. Each
repetition will switch to the next enabled input. If all inputs are enabled the order is:

Factory video video IN1
Inputs which are not enabled are skipped. If the audio cable is connected, when
switching from video IN1 to video IN2, also the sound will be switched.
Press CD- or RADIO-button (AUDIO-button of the small iDrive) to return to the
factory-video.
Long press OPTION-button to switch the picture format 16:9 (split-screen) and 24:9
(only available for ultra-wide screens 8.8"/10.2"
Switchover by vehicle buttons isn't possible in all vehicles. In some vehicles the
external keypad must be used.
3.7.

By keypad

Alternatively or additionally to the MENU-button the interface's keypad can be used to
switch the enabled inputs.
Note: The white wire of the 6pin cable can be used with a +5-12V pulse to switch the video-
sources alternatively.
4.

Specifications

BATT/ACC range
Stand-by power drain
Power consumption
Video input formats
Video input formats
Temperature range
Dimensions video-box
Dimensions CAN-box
Version 26.04.2021
 
video IN2 factory video
).
HW CAM(V31)/(V71)

...
7V - 25V
45mA
380mA
0.7V - 1V
NTSC
-40°C to +85°C
113 x 22 x 115 mm (W x H x D)
88 x 25 x 66 mm (W x H x D)
RL2-NBT