Maintenance And Care; Every Day; Cleaning The Grease Filter; Cleaning Programme - Winterhalter MTR Series Operating Instructions Manual

Maintenance and care

8 Maintenance and care
Do not spray the machine or direct vicinity (walls and floor) with a water hose, steam jet or high-
pressure cleaner.
When cleaning the floor, take care to avoid flooding the substructure of the machine, in order to
prevent the uncontrolled entry of water.
Warning

8.1 Every day

8.1.1

Cleaning the grease filter

8.1.2

Cleaning programme

The machine is equipped with a cleaning programme that assists you in cleaning the interior of the machine.
The programme runs automatically. After its first part, you can clean the interior of the machine manually
with a hose and brush if required. The interior is automatically rinsed and drained during the second part.
INFO: If one of the doors is opened while the cleaning programme is running, the programme stops and has
to be restarted.
Starting the cleaning programme
 Touch button (7).
 This stops the drive.
 Screen 05 appears.
 Touch button (7). Touch button (7) again if you want to interrupt the procedure.
 The cleaning programme is started:
 Button (25) "Clean interior" appears but cannot be pressed yet.
 The circulating pumps are activated in order to rinse out the interior of the machine with tank water.
 The heat exchanger is rinsed out with hot water (OPTION).
 The drive system runs.
16
The grease filter protects the exhaust air system and the heat
exchanger (if installed) against a buildup of grease. The grease
filter must be cleaned daily in order to function properly.
 Remove the grease filter.
 Place the grease filter onto a washing rack or the conveyor
belt and clean it in the machine at slow transport speed (>).
 Reinsert the grease filter.
Screen 03 Screen 05 Screen 05