Screen Saver; Operation; Making Ready For Operation; Before Switching On The Machine - Winterhalter MTR Series Operating Instructions Manual

Operation

6.3 Screen saver

7 Operation

7.1 Making ready for operation

This explains how to make the machine ready for operation. You can also program the machine to switch on
automatically at a certain time ( 13.4) and be ready to operate about 15 – 25 minutes later (depending on
the water inlet temperature and the machine size).
7.1.1

Before switching on the machine

 Open the water stopcock in the building. There may be up to three stopcocks depending on the size of
the machine and its level of equipment.
 Switch on the mains disconnector in the building or the built-in mains disconnector on the machine.
 For your own safety, test the residual-current circuit breaker (RCCB) installed in the building by pressing
the test button.
 Open the doors and check that all filters (strainers, filter inserts), barrier curtains and washing arms are in
place.
 Check that the grease filter at the machine infeed is in place.
 Close all doors.
When using chemicals, comply with the safety notes and dosage recommendations printed on
the packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
Warning
Do not mix different detergent products together.
 Check whether there is detergent or rinse aid in the storage tanks (drum or container). Top them up in
good time or renew the storage tanks so that the washing result will not be impaired. Depending on the
machine equipment level, the screen may also display when the storage tanks are empty.
 If there are any swivelling table elements (e.g. roller conveyor) present, fix them in their working position.
8
A screen saver appears if you do not make any screen entries for a
certain length of time when the machine is switched on. The screen
goes dark if a further period of time elapses without any entries.
Touching the screen switches it back on.
INFO: The screen saver does not appear unless the machine is
filled. There is no screen saver in the PIN menu ( 13). The times
for the screen saver can be changed by the Winterhalter service
technician ( 17.1).